Heavy Duty Residential 20' Aluminum Flagpole Price: 629.90 AmericanFlags.com Looking for a better quality residential flagpole? This is the one for you. This 20' aluminum cone-tapered pole comes in two 11-foot sections with a brushed aluminum finish. Pole tapers from 3" at butt to 2" at top to minimize wind resistance. Comes complete with a gold anodized aluminum ball, halyard, cleat, flash collar and everything you need for easy installation and assembly. We recommend a 3' X 5' flag for this pole, which is sold seperately.

Heavy Duty Residential 20' Fiberglass Flagpole Price: 525.00 AmericanFlags.com This fiberglass pole is designed to withstand winds up to 130 MPH (unflagged) and come with a precision rotating truck to ensure 360-degree tangle-free flying in all wind conditions. This flagpole is maintenance free, safe and strong. It's white gel-coat surface won't soil, scratch, chalk, crackle or mildew over time. Installation is simple with all necessary accessories included. All of our fiberglass flagpoles come with an anodized gold ball top, base cover, and ground sleeve. This 20' flagpole ships in one section, and has a butt diameter of 4 1/4 inches. Its tapered top diameter is 3 inches, while its ball diameter is 5 inches. Installation is easy using the included ground sleeve that is 2 feet long.

Villager III 20' Residential Fiberglass Flagpole Price: 299.00 AmericanFlags.com This fine flagpole is manufactured with a mixture of fiberglass and polyester resin, finished with a marine grade UV-resistant gel coat to prevent hazing, chalking and deterioration of color. Its specially-engineered tapered design provides added strength and wind resistance to 100mph and average 50,000lbs per square inch tensile strength.This residential grade 3-piece white fiberglass flagpole comes complete with a gold anodized aluminum spun ball top, stationary truck, cleat, ½” Nylon halyard, corrugated PVC ground sleeve and flash collar.This flagpole ships via UPS.Designed to withstand wind speeds in excess of 100mph un-flagged.6 Year Limited Warranty on the flagpole shaft.Marine-grade UV-resistant high gloss gel coat finish.50,000 lbs per square inch tensile strength.Does not conduct electricity and is safer than aluminum or steel poles.Easy, 1-person installation.Butt diameter 3.75", top diameter 2."Total length of pole is 22ft.Flag sold seperately - Tough Tex Recommended.

Patriot 20' Residential Aluminum Flagpole Set Price: 185.00 AmericanFlags.com This residential flagpole set is the perfect choice for any home and features the following:Five-piece sectional polished aluminum pole.3' X 5' Nyl-Glo colorfast US flag.Gold aluminum ball topper.Easy 1-person installation in minutes.Attractive packaging, perfect for gift-giving!

 

Commercial In-Ground Flag Poles

130' Steel Flagpole - Standard Duty Price: 25,750.00 AmericanFlags.com This A-36 Carbon Steel flagpole stands 130" in height. It has butt diameter of 18," a top diameter of 6.625" and a wall thickness of .375." It is engineered to withstand windspeeds of up to 105 MPH unflagged. It ships in four sections, joined with seamless steel concentric reducers, which provide a uniform tapered appearance. Standard Features include: • Gold Anodized Aluminum Ball • Stainless steel aircraft cable halyard • Chrome plated bronze swivel snaphooks • Neoprene snaphook covers • Beaded sling assembly • Plastic covered counterweights • Stainless steel winch assembly, with removable hand crank • Flush access door with cylinder lock and piano hinge • Spun aluminum flash collar to match pole • Galvanized corrugated steel ground sleeve with grounding spike • Urethane gloss enamel finish, designed for maximum gloss and color retention. Great for any commercial application and very popular among retailers, including car dealers!We recommend a 30' X 50' Tough Tex Flag for this 120' steel flagpole.THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU WERE INITIALLY CHARGED. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.Shipping weight: 7,456 LBS

120' Steel Flagpole - Heavy Duty Price: 24,200.00 AmericanFlags.com This Heavy Duty A-36 Carbon Steel flagpole stands 120" in height. It has butt diameter of 16", a top diameter of 6.625," and a wall thickness of .500". It is engineered to withstand windspeeds of up to 130 MPH unflagged. It ships in four sections, joined with seamless steel concentric reducers, which provide a uniform tapered appearance. Standard Features include: • Gold Anodized Aluminum Ball • Stainless steel aircraft cable halyard • Chrome plated bronze swivel snaphooks • Neoprene snaphook covers • Beaded sling assembly • Plastic covered counterweights • Stainless steel winch assembly, with removable hand crank • Flush access door with cylinder lock and piano hinge • Spun aluminum flash collar to match pole • Galvanized corrugated steel ground sleeve with grounding spike • Urethane gloss enamel finish, designed for maximum gloss and color retention. Great for any commercial application and very popular among retailers, including car dealers!We recommend a 30' X 50' Tough Tex Flag for this 120' steel flagpole.THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU WERE INITIALLY CHARGED. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.Shipping weight: 7,957 LBS

120' Steel Flagpole - Standard Duty Price: 22,400.00 AmericanFlags.com This A-36 Carbon Steel flagpole stands 120" in height. It has butt diameter of 16," a top diameter of 6.625" and a wall thickness of .375." It is engineered to withstand windspeeds of up to 105 MPH unflagged. It ships in four sections, joined with seamless steel concentric reducers, which provide a uniform tapered appearance. Standard Features include: • Gold Anodized Aluminum Ball • Stainless steel aircraft cable halyard • Chrome plated bronze swivel snaphooks • Neoprene snaphook covers • Beaded sling assembly • Plastic covered counterweights • Stainless steel winch assembly, with removable hand crank • Flush access door with cylinder lock and piano hinge • Spun aluminum flash collar to match pole • Galvanized corrugated steel ground sleeve with grounding spike • Urethane gloss enamel finish, designed for maximum gloss and color retention. Great for any commercial application and very popular among retailers, including car dealers!We recommend a 30' X 50' Tough Tex Flag for this 120' steel flagpole.THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU WERE INITIALLY CHARGED. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.Shipping weight: 6,091 LBS

100' Steel Flagpole - Heavy Duty Price: 17,750.00 AmericanFlags.com This Heavy Duty A-36 Carbon Steel flagpole stands 100" in height. It has butt diameter of 14," a top diameter of 6.625," and a wall thickness of .500." It is engineered to withstand windspeeds of up to 130 MPH unflagged. It ships in three sections, joined with seamless steel concentric reducers, which provide a uniform tapered appearance. Standard Features include: • Gold Anodized Aluminum Ball • Stainless steel aircraft cable halyard • Chrome plated bronze swivel snaphooks • Neoprene snaphook covers • Beaded sling assembly • Plastic covered counterweights • Stainless steel winch assembly, with removable hand crank • Flush access door with cylinder lock and piano hinge • Spun aluminum flash collar to match pole • Galvanized corrugated steel ground sleeve with grounding spike • Urethane gloss enamel finish, designed for maximum gloss and color retention. Great for any commercial application and very popular among retailers, including car dealers!We recommend a 30' X 50' Tough Tex Flag for this 100' steel flagpole.THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU WERE INITIALLY CHARGED. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.Shipping weight: 5,393 LBS

100' Steel Flagpole - Standard Duty Price: 15,500.00 AmericanFlags.com This A-36 Carbon Steel flagpole stands 100" in height. It has butt diameter of 12.75," a top diameter of 4.5" and a wall thickness of .375." It is engineered to withstand windspeeds of up to 105 MPH unflagged. It ships in three sections, joined with seamless steel concentric reducers, which provide a uniform tapered appearance. Standard Features include: • Gold Anodized Aluminum Ball • Stainless steel aircraft cable halyard • Chrome plated bronze swivel snaphooks • Neoprene snaphook covers • Beaded sling assembly • Plastic covered counterweights • Stainless steel winch assembly, with removable hand crank • Flush access door with cylinder lock and piano hinge • Spun aluminum flash collar to match pole • Galvanized corrugated steel ground sleeve with grounding spike • Urethane gloss enamel finish, designed for maximum gloss and color retention. Great for any commercial application and very popular among retailers, including car dealers!We recommend a 30' X 50' Tough Tex Flag for this 100' steel flagpole.THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU WERE INITIALLY CHARGED. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.Shipping weight: 3,733LBS

Fiberglass Flagpoles with Internal Halyards Price: 1,199.00 AmericanFlags.com Our fiberglass poles are designed to withstand winds up to 130 MPH (unflagged) and come with a precision rotating truck to ensure 360-degree tangle-free flying in all wind conditions. They are maintenance free, safe and strong. Their gel-coat surface won't soil, scratch, chalk, crackle or mildew over time. Installation is simple with all necessary accessories included. All of our fiberglass flagpoles come with an anodized gold ball top, base cover, and ground sleeve. These poles feature an internal halyard to thwart vandalism, protect your flag and provide a high-class, clean look to your flagpole. Flagpoles 25' in height come in one section, while all others come in two sections to reduce shipping costs and ease installation.* Our 25' poles have a butt diameter of 6 inches, a top diameter of 3 inches, a ball diameter of 6 inches, and a ground sleeve that is 3 feet long. * Our 30' poles have a butt diameter of 6 3/4 inches, a top diameter of 3 inches, a ball diameter of 6 inches and a ground sleeve that is 3 feet long. * Our 35' poles have a butt diameter of 7 inches a top diameter of 3 inches, a ball diameter of 6 inches and a ground sleeve that is 4 feet long. * Our 40' poles have a butt diameter of 7 inches, a top diameter of 3 inches, a ball diameter of 6 inches and a ground sleeve that is 4 feet long. THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU PAID. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.

Fiberglass Flagpoles with External Halyards Price: 599.00 AmericanFlags.com Our fiberglass poles are designed to withstand winds up to 130 MPH (unflagged) and come with a precision rotating truck to ensure 360-degree tangle-free flying in all wind conditions. They are maintenance free, safe and strong. Their gel-coat surface won't soil, scratch, chalk, crackle or mildew over time. Installation is simple with all necessary accessories included. All of our fiberglass flagpoles come with an anodized gold ball top, base cover, and ground sleeve. Flagpoles 20' and 25' come in one section, while all others come in two sections to reduce shipping costs and ease installation.* Our 20' poles have a butt diameter of 4 3/4 inches a top diameter of 3 inches, a ball diameter of 5 inches, and a ground sleeve that is 2 1/2 feet long. * Our 25' poles have a butt diameter of 4 3/4 inches, a top diameter of 3 inches, a ball diameter of 5 inches and a ground sleeve that is 3 feet long. * Our 30' poles have a butt diameter of 6 3/4 inches a top diameter of 3 inches, a ball diameter of 6 inches and a ground sleeve that is 3 feet long. * Our 35' poles have a butt diameter of 7 inches, a top diameter of 3 inches, a ball diameter of 6 inches and a ground sleeve that is 4 feet long. * Our 40' poles have a butt diameter of 7 inches, a top diameter of 3 inches a ball diameter of 6 inches and a ground sleeve that is 4 feet long. THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. THE SHIPPING COSTS SHOWN AT CHECKOUT REFLECTS A GENERAL ESTIMATE OF SHIPPING COSTS. WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER IF THE ACTUAL SHIPPING COSTS TO YOUR LOCATION ARE MORE OR LESS THAN YOU PAID. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.

20' Aluminum Flagpole Price: 399.00 AmericanFlags.com This 20' aluminum flagpole is tapered with a butt diameter of 3" and a top diameter of 1 7/8." The wall thickness is .125." It is shipped with a gold anodized ball, stationary truck, flash collar, polypropylene halyard, 2 snaps, 9" cleat and plastic ground tube that is 2' deep. This pole features a rich, natural satin finish. Includes all accessories for complete installation except flag. Poles are constructed from 6063-T6 aluminum meeting ASTM B 241 specifications. Complete specs available on request.THESE POLES ARE SHIPPED BY VIA TRUCK FROM LOCATIONS ACROSS THE UNITED STATES. SHIPPING COSTS VARY DEPENDING ON POLE SIZE AND YOUR LOCATION. SINCE WE PREFER TO CHECK WITH MULTIPLE CARRIERS TO GET YOU THE VERY BEST PRICE, WE WILL CONTACT YOU AFTER YOU PLACE YOUR ORDER WITH EXACT COSTS TO YOUR LOCATION. YOU MAY CANCEL YOUR ORDER WITHOUT CHARGE AT THAT POINT IF THE COSTS ARE NOT ACCEPTABLE TO YOU.

 

Copyright TheGuideToTheUSA.com - All Rights Reserved